Application

Depending on its thickness, Flaster tiles can be used for walls, floors and for heavy traffic.

Choose the proper thickness for the longest lifetime of your surface.

Wall

For wall covering use 1 cm thick Flaster. Prepare the surface of the wall. The expansion joints have to be applied on the tiling layout as well. Apply SOPRO GD 749 primer then use SOPRO FKM 600 Silver adhesive. Grouting is not neccessary.

Floor

For flooring use at least 2 cm thick Flaster. Prepare the surface of the floor. The expansion joints have to be applied on the tiling layout as well. Apply SOPRO GD 749 primer then use SOPRO FKM Silver adhesive. 

Access floor

Prepare the supporting structure of the access floor. Flaster must laid on a solid and flat base. For flooring use at least 2 cm thick Flaster.Lay one layer PE foil on the base, then prepare a 3-6 cm thin screed layer. Make 25 m2 sections only, prepare expansion joints between them. Prepare the surface with SOPRO GD 749 primer then use SOPRO FKM Silver adhesive. Place and level the Flaster tiles, according to the dilatations and tiling layout.