Dimensions

 


 

Field of use

Material Tickness

Wall

Floor

Interior

Exterior

1 cm

 

 
2 cm

4 cm  

 

Application

 
Dry laid on sand  

 

Glued and grouted 1-5 mm join

Glued with zero join


Colors

   
           
             
Ow
basic
off-white
           
Cm
basic
cement
           
Mg
basic
mouse grey
           
Rg
basic
rock grey
           
Eg
basic
ervin grey
           
Gb
basic
grey brown
           
Tb
special
tobacco
           
Rd
special
red
           
Pw
special
powder
           
Op
special
old pink
           
Sy
special
sargi yellow
           
Mb
special
midnight black
           
Pr
special
purple
           
Db
special
dark blue
           
Sb
special
sky blue
           
Sl
special
silver
           
Ag
special
apple green
           
Sg
special
sm green
                   

Technical specification & Range parameter

Size difference: length and width

The deviation, in percent, of the average size of each piece from the average size of 10 test specimens: ± 1%.

 

Thickness difference

The deviation, in percent, of the average thickness of each tile from the average thickness of 10 specimens: ± 10%

 

Cracks / Broken pieces

Any visible cracks are considered as defects, but due to our quality inspection policies and our strict packing methods those cracks can solely be results of shipping. Therefore we highly advise checking products throughoutly on delivery.

 

Hairline cracks

Cobweb phenomenon is a natural characteristic of fiber reinforced concrete, therefore this doesn’t cause any major cracks on the surface.

 

Other injuries

Visible chipping are considered as defects, but due to our quality inspection policies and our strict packing methods those chippings can solely be results of shipping. Therefore we highly advise of checking products throughoutly on delivery.

Due to the special structure of concrete, it may contain small inclusions even on the edges of the product. These inclusions should be considered as a natural characteristic therefore they don’t qualify as defects and definitely not as chipping.

 

Holes and airbubles

On sleek surfaces the maximum number of holes and/or bubbles are 150 bubbles per square meter, the diameter of each bubble is not more than 2mm.

 

Surface

Sleek surface is not necesseraly homogeneous. Any cloudy or slightly spotty surface shouldn’t be considered as a defect.

However, a minimum of 95% of the tiles shall be free from visible defects, that would impair the appearance of the major area of tiles.

 

Color

Our products are colored with pigments, therefore there is no abrasion of color. Color tone difference in appearance between one piece and another: V3. This number provides high shade variations. The intensity of each color may vary from tile to tile and may appear different from another piece.

Reinforcement 

IVANKA Flasters are high performance concrete pieces, reinforced with monofilament polypropylene fibers, which fibers are surface treated to avoid dispersion.

 

Surface treatment

Every piece is surface treated with a special sealer in order to protect the material against stains and to facilitate further handling. Also, it gives an extra UV protection.